Hitachi zaxis 330 pdf

Page 80 OPERATOR’S STATION Password Change (Optional) 1. After the basic screen is displayed, push the menu key in order to display the main menu. Page 104: Cab Light, Installing Fire Extinguisher (optional) Turn the cab light ON or OFF by using switch (1). M1U1-01-022 INSTALLING FIRE EXTINGUISHER (Optional) A fire extinguisher (2) can be installed at the left rear corner inside the cab.

Page 40 • Keep bystanders out of the work site during operation. • Asbestos might be present in imitation parts. Page 48 SAFETY SIGNS/Europe/Asia/Middle and Near East Model Only Sign indicates an electrical hazard from handling the cable. Wiper • Turn the wiper/washer switch to the specified position to operate the wiper.

Page 44 SAFETY SIGNS/Europe/Asia/Middle and Near East Model Only When moving the seat height/tilt lever downward, press the lever grip with a palm from the top side. Do not grasp the lever grip to operate the lever, possibly resulting in pinch of your fingers into the seat stand. Page 45 SAFETY SIGNS/Europe/Asia/Middle and Near East Model Only SS3106039 Sign indicates a hazard of being hit by the working device of the machine.

When the key switch is turned to the ON position, the starting screen displays for about two seconds and the basic screen displays. Page 72 OPERATOR’S STATION Pulverizer 1 Maximum Pump 1 and 2 Flow Rate Maximum Engine Speed Accumulator Control Solenoid Valve: OFF Secondary Relief Selector Control Solenoid Valve: OFF Three way Valve Control Solenoid Valve: OFF The three way valve is connected to the control valve. The value of remaining hours is reset to that of change interval.

Page 89 OPERATOR’S STATION When more than two items apply • 1. If turning the key switch to the ON position, the starting screen displays. The monitor displays the corrective action to the alarm situation.

Menu Key Basic Screen T1V1-05-01-123 2. Select fuel rate display/No display from main menu by using keys 1 and 2. Push the determination key. Hitachi machine models are classified into 5 classes and 1 model as shown in the table below. Menu Key Basic Screen T1V1-05-01-123 2. Select maintenance settings from main menu by using keys 1 and 2 . Push the determination key. Consult your nearest HITACHI dealer to install a fire extinguisher (2). M1U1-01-023 1-55…

Slow OFF Position: The wiper stops and is retracted. INT Position: The wiper operates intermittently at the interval selected by the switch position as described below. Push a Relevant Key T1V1-05-01-095 T1V5-05-01-013 1-16… Page 66: Contents Of Alarms Stop operation. Page 97 OPERATOR’S STATION WORK LIGHT SWITCH Work light switch has the following positions: • 1 Position Work light (1) on the base machine will light. Password Input Screen T1V5-05-01-093 Determination Key Delete Key T1V5-05-01-002 2. Return to the password input screen, by pushing the back key.

Then, the language settings screen displays. 3. Select a desired language by using keys 1 and 2 Push the determination key. Use a maintenance work light when working under or inside the machine. • Always use a work light protected with a guard. In case the light bulb is broken, spilled fuel, oil, antifreeze fluid, or window washer fluid may catch fire.

Model M1U1-01-015 1-45… Page 95: Engine Control Dial OPERATOR’S STATION ENGINE CONTROL DIAL Fast Idle Use engine control dial (1) to adjust engine speed. Page 47 SAFETY SIGNS/Europe/Asia/Middle and Near East Model Only Sign indicates a crush hazard by rotation of upper structure of the machine.

Название файла: zx160.pdf
Размер файла: 192 Килобайт
Количество загрузок: 1033
Количество просмотров: 532
Скачать: zx160.pdf

Похожие записи: