Page 121: Shooting Movies Shooting Movies Set the Mode Dial to Похожие записи:
Jump method Image location To search images according to the shooting date, select [Date]. During image playback, turn the <6> dial to display the shooting date. If the card has both [Movies] and [Stills], select either one to display only movies or stills. Connect the AV cable to the camera’s
terminal. Select Menu/Sensor Cleaning/Auto Cleaning and set to «Disable». After the modification is completed, be sure NOT to select «Clean now» in the same menu item.
Press the button to lock the exposure, then recompose and take the shot. The flash capacitor maintains its charge for a long time even after removing the battery and this charge can cause dangerous injury or even potentially fatal electrical shock. When storing the camera without a lens attached, be sure to attach the body cap to the camera.
Page 168: Set The Printing Effects wPrinting Function The image will be printed according to the printer’s standard colors. EOS Rebel T1i Looking for more product information? The default settings are the same as the <1> (Full Auto) mode. * CA stands for Creative Auto.
Page 75: More Advanced Techniques More Advanced This chapter builds on the previous chapter and introduces more ways to shoot creatively. The “Quick Start Guide” helps you start using your MANUAL new camera right away. It starts on the last page of this manual. Slow motion The slow-motion speed is indicated on the upper right. Aperture � Press the key to select ISO speed the Picture Style, then press Highlight tone . priority Flash exposure compensation Metering mode Style Description Drive mode P Standard Vivid colors and sharp images.
Always select «Clean manually» following the owner’s manual instructions. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable. The setting of this feature can be changed. [OnPD] : The vertical image is automatically rotated during playback on both the camera’s LCD monitor and on the computer.
Adjust levels When you select [Manual], you can change the histogram’s distribution and adjust the image’s brightness and contrast. The camera is compatible with “wPictBridge” which is the standard for direct printing. Page 170 wPrinting e Adjustment of Printing Effects Brightness The image brightness can be adjusted.
Page 153 Function Exit Returns to the single-image display. Page 40: Formatting The Card Formatting the Card If the card is new or was previously formatted by another camera or computer, format the card with the camera.
Название файла: CAWTS03_ios.pdf
Размер файла: 130 Килобайт
Количество загрузок: 723
Количество просмотров: 541